Дома > Приложения > Бытовая техника > Microchip PIC18F47Q10 PIC MIC low power application development program

Microchip PIC18F47Q10 PIC MIC low power application development program

Время публикации : 2019-05-06 Microchip,PIC
Microchip's pic18f27/47q10 microcontroller (MCU) is a 28/40/44 pin device with analog, nuclear independence and communication peripherals, suitable for a variety of general and low-power applicationsMCU with 10 bit ADC and calculation (ADC2) automatic capacitive voltage divider (CVD) technology, used in high-grade touch detection, averaging, filtering, sampling and automatic threshold comparison.

Введение решения

Pic18f27/47q10 microcontrollers feature analog, core independentAnd the communication peripherals fora wide range of general purpose and low power applications. These 44-28/40 / pin devices are equippedwith a 10 - bit ADC with Computation (ADC2) automating CapacitiveVoltage Divider (CVD) techniques foradvanced touch sensing, averaging, filtering,Oversampling and performing automatic thresholdcomparisons. Braking offers a set of core independent peripherals to the as Complementary WaveformGenerator (CWG), Windowed Watchdog Timer (WWDT),Cyclic Redundancy Check (CRC)/MemoryScan, Zero - Cross Detect (ZCD), Configurable Logic Cell (CLC), and Peripheral Pin Select (PPS), providing increased the design flexibility and lower the system cost.

Main features:

Nuclear features:

• C Compiler Optimized RISC Architecture

• Operating Speed:

-- DC -- 64 MHz clock input over the full VDD range

-- 62.5 ns minimum instruction cycle

• Programmable 2-level Interrupt Priority

• 31-level Deep Hardware Stack

• three-8-bit tick (tmr2/4/6) with Hardware Limit Timer (HLT)

• four-16-bit tick (tmr0/1/3/5)

• low-current power-on-reset (POR)

Power - up Timer (PWRT)

Brown - out Reset (BOR)

• low-power BOR (LPBOR Option)

• Windowed Watchdog Timer (WWDT):

-- Watchdog Reset on too long or too short interval between Watchdog clear events

- Variable prescaler selection

-- Variable window size selection

- All sources configurable in the hardware or software


• Up to 128K Bytes Program Flash Memory

• Up to 3615 Bytes Data SRAM Memory

• Up to 1024 Bytes Data EEPROM

• Programmable Code Protection

• Direct, Indirect and Relative Addressing modes

Job characteristics

• Operating Voltage Range:

1.8 V to 5.5 V

• Temperature Range:

- Industrial: - 40 ℃ to 85 ℃

- Extended: - 40 ℃ to 125 ℃

Energy-saving working mode

• Doze: CPU and Peripherals Running at Different Cycle Rates (attached CPU is lower)

• Idle: CPU hangs While Peripherals operates

• Sleep: Lowest Power Consumption

• Peripheral Module Disable (PMD):

-- Ability to disable hardware module to minimize active power consumption of unusedperipherals

• Extreme low-power mode (XLP)

-- Sleep: 500 nA typical @1.8v

-- Sleep and Watchdog Timer: 900 nA typical @1.8 V

Digital peripherals

• Configurable Logic Cell (CLC) :

-- Integrated combinational and sequential logic

• Complementary Waveform Generator (CWG):

-- Rising and falling edge dead band control

-- full-bridge, half-bridge, 1-channel drive

- Multiple signal sources

• the Capture/Compare/PWM (CCP) modules:

- Two CCPs

-- 16-bit resolution for Capture/Compare modes

-- 10-bit resolution for PWM mode

• 10-bit pulse-width Modulators (PWM):

- Two 10 - bit PWMs

• Serial Communications:

-- Two Enhanced USART (EUSART) with auto-baud Detect, auto-wake up on Start.

RS - 232, RS - 485, LIN compatible


- the I2C, SMBus and PMBus ™ compatible

• Up to 35 I/O Pins and One Input Pin:

- Individually programmable pull - ups

- Slew rate control

-- Interrupt-on-change on all pins

-- Input level selection control

• Programmable CRC with Memory Scan:

-- Reliable data/program memory monitoring for fail-safe operation (e.g., Class B)

-- Calculate CRC over any portion of Flash or EEPROM

-- High speed or background operation

• Hardware Limit Timer (tmr2/4/6 +HLT):

-- Hardware monitoring and Fault detection

• Peripheral Pin Select (PPS):

-- Enables pin mapping of digital I/O

• Data Signal Modulator (DSM)

Analog peripherals

• 10-bit Analog to Digital Converter with Computation (ADC2):

- 35 external channels

-- Conversion available during Sleep

-- Four internal analog channels

-- Internal and external trigger options

-- Automated math functions on input signals:

• Averaging, filter calculations, oversampling and threshold comparison

-- 8-bit hardware acquisition timer

• Hardware Capacitive Voltage Divider (CVD) Support:

- 8-bit precharge timer

Adjustable sample-and-hold capacitor array

-- Guard ring digital output drive

• Zero - Cross Detect (ZCD) :

- Detect the when AC signal on the pin crosses the ground

• 5-bit digital-to-analog Converter (DAC):

- the Output available externally

-- Programmable 5-bit voltage (% of VDD,[VREF+ - VREF-], FVR)

-- Internal connections to comparators and ADC

• Two Comparators (CMP) :

- Four external inputs

External output via PPS

• Fixed Voltage Reference (FVR) Module:

-- 1.024v, 2.048v and 4.096v output levels

-- Two buffered outputs: One for DAC/CMP and One for ADC

The clock structure

• high-precision Internal Oscillator Block (HFINTOSC):

-- Selectable frequencies up to 64 MHz

- plus or minus 1% at calibration

• 32 kHz low-power Internal Oscillator (LFINTOSC)

• External 32 kHz Crystal Oscillator (SOSC)

• External high-frequency Oscillator Block:

- Three crystal/resonator modes

-- Digital Clock Input mode

-- 4x PLL with external sources

• Fail - Safe Clock Monitor:

-- Allows for safe shutdown if external clock stops

• Oscillator start-up Timer (OST)

Programmable/debug features

• In - Circuit, Serial Programming ™ (ICSP ™) via Two Pins

• in-circuit Debug (ICD) with Three Breakpoints via Two Pins

Debug Integrated On Chip

Pic18f27/47q10 series block diagram

Pic18f27/47q10 series simplified PIC MCU clock source block diagram

Curiosity Nano evaluation kit for PIC18F47Q10

The PIC18F47Q10 named Nano evaluation kit is a hardware platform to evaluate The PIC18F47Q10microcontroller.

Supported by MPLAB ® X Integrated Development Environment (IDE), the kit provides easy access to thefeatures of the PIC18F47Q10 and explains how both the device into a custom design.

The Curiosity Nano series of evaluation kits include an on-board debugger, and no external tools arenecessary to program The PIC18F47Q10.

The Microchip PIC18F47Q10 Curiosity Nano evaluation kit is a hardware platform to evaluate The PIC18F47Q10 microcontroller.

Curiosity Nano evaluation kit PIC18F47Q10 main features:

• PIC18F47Q10 - I/MP Microcontroller

• One Yellow User LED

• One Mechanical User Switch

• On - Board, the Debugger

- Board identification in MPLAB ® X

-- One green power and status LED

- Programming and was debugging

-- Virtual COM port (CDC)

-- One logic analyzer channel (DGI GPIO)

• USB Powered

• Adjustable Target Voltage

-- MIC5353 regulator controlled by the on-board debugger

-- 1.8-5.1V output voltage (limited by USB input voltage)

-- 500 mA maximum output current (limited by ambient temperature and output voltage)

Curiosity Nano evaluation kit PIC18F47Q10 appearance drawing

Curiosity Nano PIC18F47Q10 Curiosity Nano evaluation kit circuit diagram

Curiosity Nano PIC18F47Q10 Curiosity Nano evaluation kit circuit diagram

Curiosity Nano evaluation kit PIC18F47Q10 pin map

Ключевые компоненты

No. номер части Производитель
5 PICO-HD01 AAEON Technology