DIP-2P
- Картинка & Модели
- Описание
- Соедините цену
- Количество
- Операция
-
-
LED Panel Mount Indicators White Diffused 2.0 Volt
-
1 + 10 + 25 + 50 + >=100 -
MOQ : 1 Наличность : 6000
-
-
PHOTOTRANSISTOR | DARLINGTON | 800NM PEAK WAVELENGTH | 30M | DOME-3.0
-
1 + 10 + 25 + 50 + >=100 -
MOQ : 1 Наличность : 24100
-
-
STANDARD LOW POWER INDUCTORS / Switch Mode Power Converters & Ripple Filters,Power Inductors INDUCTOR
-
1 + 10 + 25 + 50 + >=100 -
MOQ : 1 Наличность : 205
-
Q:What defines the physical structure of DIP-2P?
A:Key features include:
- Dual in-line pins: 2-pin through-hole design for easy PCB mounting.
- Standardized spacing: Pins spaced at 2.54 mm (0.1 inches) for compatibility with breadboards and sockets.
- Robust housing: Molded plastic body (typically 7–10 mm thick) for mechanical durability.
- Lead length: Extended leads (3–5 mm) for manual soldering flexibility. -
Q:Why choose DIP-2P over alternatives?
A:Critical advantages:
- Ease of use: Simplifies prototyping and hand assembly compared to SMD packages.
- Cost-effective: Low manufacturing complexity and reusability in sockets.
- High voltage/current tolerance: Suitable for power components (e.g., relays, optocouplers).
- Repairability: Easy desoldering for component replacement. -
Q:What are common technical specs?
A:Standard configurations (consult datasheets):
- Body Size: 6.35 mm × 10.16 mm (varies by manufacturer).
- Pin Pitch: 2.54 mm (fixed standard).
- Material: Plastic body with tin-plated copper leads.
- Temp Range: -40°C to +85°C (industrial-grade variants available). -
Q:Where is DIP-2P typically applied?
A:Dominant use cases:
- Power components: Relays (e.g., Omron G5V-2), fuses, and optocouplers.
- Discrete semiconductors: Diodes (e.g., 1N400x series), transistors.
- Legacy systems: Industrial control boards and educational kits. -
Q:What are critical assembly guidelines?
A:Key recommendations:
- PCB Design: Ensure hole diameter ≥ 0.8 mm for pin insertion.
- Soldering: Manual or wave soldering at 250–300°C (lead-free: 260°C max).
- Inspection: Visual checks for pin alignment and solder fillets.
- Handling: Avoid excessive bending of leads to prevent breakage.



ВСЕ КАТЕГОРИИ