LQFP 144
- Картинка & Модели
- Описание
- Соедините цену
- Количество
- Операция
-
Q:What defines the physical structure of LQFP 144?
A:Key features include:
- Leaded design: Gull-wing leads for robust PCB mounting.
- Central thermal pad: Optional 10×10 mm pad for improved heat dissipation.
- 144-pin layout: Quadruple-row arrangement (36 pins per side).
- Low profile: 1.4 mm typical body thickness. -
Q:Why choose LQFP 144 over alternatives?
A:Critical advantages:
- Space efficiency: 30% smaller footprint than QFP-144 with similar pin count.
- Thermal Performance: Exposed die pad reduces θJA by ~15% vs. standard LQFP.
- Electrical Benefits: Short lead frames minimize inductance (<1 nH per pin).
- Reliability: Moisture-sensitive level (MSL 3) compliant for humid environments. -
Q:What are common technical specs?
A:Standard configurations (consult datasheets):
- Body Size: 20×20 mm (±0.2 mm tolerance).
- Height: 1.4 mm (max).
- Pin Pitch: 0.5 mm (fine-pitch).
- Material: Copper-alloy leads with matte Sn plating.
- Temp Range: -40°C to +125°C (industrial grade). -
Q:Where is LQFP 144 typically applied?
A:Dominant use cases:
- Microcontrollers: STM32F4 series, NXP Kinetis.
- Communication ICs: Ethernet PHYs (e.g., DP83848), CAN controllers.
- Industrial Control: Motor drivers (e.g., DRV8847), PLC interfaces. -
Q:What are critical assembly guidelines?
A:Key recommendations:
- PCB Design: 0.1 mm solder mask clearance around pads; thermal vias under exposed pad.
- Solder Paste: Type 3 (particle size 25–45 µm) for 0.5 mm pitch.
- Reflow Profile: Ramp rate ≤3°C/s, peak temp 235–245°C (Pb-free).
- Inspection: AOI (Automated Optical Inspection) for lead coplanarity; X-ray for void detection.



ВСЕ КАТЕГОРИИ