ARM MCU, High Performance, STM32 Family STM32F4 Series Microcontrollers, ARM Cortex-M4, 32bit
STM32F446RET6 информация о продукте
• STM32 microcontroller in LQFP64 package
• External SMPS to generate Vcore logic supply (only available on '-P' suffixed boards)
• 1 user LED shared with Arduino™
• 1 user and 1 reset push-buttons
• 32.768 kHz LSE crystal oscillator
• Board expansion connectors:
– Arduino™ Uno V3
– ST morpho extension pin headers for full access to all STM32 I/Os
– External SMPS experimentation dedicated connector (only available on '-P' suffixed boards)
• Flexible power-supply options: ST-LINK USB VBUS or external sources
• On-board ST-LINK/V2-1 debugger/programmer with USB reenumeration capability. Three different interfaces supported on USB: mass storage, virtual COM port and debug port
• Comprehensive free software libraries and examples available with the STM32Cube MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs, Arm® Mbed™
• Arm® Mbed Enabled™ compliant (only for some Nucleo part numbers)
The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. For the compatible boards, the SMPS significantly reduces power consumption in Run mode.
The Arduino™ Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer.
The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to the Arm® Mbed™ online resources at http://mbed.org.
- 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
- LCD parallel interface, 8080/6800 modes
- 4 to 26MHz Crystal oscillator
- Internal 16MHz factory-trimmed RC (1% accuracy)
- 32kHz Oscillator for RTC with calibration
- Sleep, stop and standby modes
- VBAT supply for RTC, 20 x 32-bit backup registers and optional 4kB backup SRAM
- SWD and JTAG interfaces
- Cortex-M4 Trace Macrocell™
- 2 x Serial audio interface
- 2 x CAN (2.0B Active) interface
- SDIO interface
- USB 2.0 full speed device/host/OTG controller with on-chip PHY
- USB 2.0 high-speed/full-speed device/host/OTG controller
- 8 to 14-bit parallel camera interface up to 54Mbps
- CRC calculation unit
- RTC - subsecond accuracy, hardware calendar
- 96-bit Unique ID
- Clock Speed
- 180 MHz
- RAM Memory Size
- 131072 B
- Number of Bits
- Product Lifecycle Status
- Mounting Style
- Surface Mount
- Number of Pins
- Lead Free Status
- Lead Free
- ECCN Code
STM32F446RET6 Связанные специальные
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
As described Works well Recommended Seller AAA+++ Thanks!!!
Estimated Delivery Time: Apr 27 - May 02 days (choose Expedited at checkout).
Перевозка & Оплата
- Доставка типа
- Гонорар корабля
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Условия платежа
- Рука Плата
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
Мы обеспечиваем высокое качество продукции, заботливое обслуживание и после продажи гарантии
У нас есть богатые продукты, может удовлетворить ваши различные потребности.
Минимальное количество заказа начинается от 1шт.
Самая низкая международная стоимость доставки начинается от $ 2,00 США.
90 дней гарантия качества для всех продуктов.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that STM32F446RET6 is the original manufacturer or agent of ST?
- We have a professional business development department to strictly test and verify the qualifications of ST original manufacturers and agents. All ST suppliers must pass the qualification review before they can publish their STM32F446RET6 devices; we pay more attention to the channels and quality of STM32F446RET6 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of STM32F446RET6 chips? Including ST original factory information, Microcontrollers application, STM32F446RET6 pictures?
- You can use Jotrin's intelligent search engine, or filter by STM32 32-bit Arm Cortex MCUs ; STM32 High Performance MCUs ; STM32F4 Series category, or find it through STMicroelectronics, Inc Information page.
- Q: Are the ST's STM32F446RET6 price and stock displayed on the platform accurate?
- The ST's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for STM32F446RET6, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of STM32F446RET6?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the STM32F446RET6 we delivered, we will accept the replacement or return of the STM32F446RET6 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of STM32F446RET6.
(3)The STM32F446RET6 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as STM32F446RET6 datasheet pdf, STM32F446RE pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.ST parts naming conventions
- 2.Low Power High Precision Distance Measuring Miniature ToF Sensor-VL53L1X
- 3.STMicroelectronics Maximizes Access to High-Performing, Low-Power STM32L4 MCUs with New Development Ecosystem
- 4.Dual core performance, rich functions, ST released a new micro controller
- 5.New Intelligent Power Modules from STMicroelectronics Enable Greener and More Reliable Appliances
- 6.STMicroelectronics Announces Timing for Fourth Quarter / Full-Year 2015 Earnings Release and Conference Call
VND7140AJTR-E IC DVR HIGH-SIDE 2CH POWERSSO-16
FXTH870911DT1 Pressure Sensor, Accelerometer and Temperature Sensor Automotive 24-Pi...
MKL82Z128VLK7 ARM MCU, Kinetis L Family KL8x Series Microcontrollers, ARM Cortex-M0+...
5ASXMB5G4F40I5N FPGA Arria V SX 462000 Cells 28nm Technology 1.1V 1517Pin FBGA
BLED112-V1 Bluetooth 4.0, Module, 3.6V to 5.5V Supply, -91dBm Sensitivity
ESP-WROOM-02 SMD MODULE, ESP8266EX, 16MBITS S